company news about Storage method of tape

1.The tape need to be stored in the warehouse to avoid sun and rain, keep it clean and dry, and the room temperature should be between -15℃ and 40℃；

2.The tape should be placed in a roll, Don’t folded, and should be turned over once a quarter when the storage time is too long；

3.When loading and unloading conveyor belt, it is best to use crane and cable with crossbeam to lift smoothly to avoid damage to belt edge, do not load and unload arbitrarily, cause loose roll and flick sleeve.

4. The type and specification should be selected reasonably according to the needs and conditions

5.Different varieties, different specification,models and strength, cloth layer number of tape connection( matching group) shall not be used together.

6. It is best to use thermal vulcanization bonding to improve reliability and maintain high effective strength of conveyor belt joint.

7.The simple diameter of the conveyor roller and the minimum pulley diameter of the conveyor belt shall conform to the relevant regulations.

8.Do not make tape peristalsis, to maintain towing roller, vertical roll flexible, tension force should be moderate

9.When the conveyor is equipped with baffle and cleaning device, the wear of belt should be avoided.

10.Cleanliness is the basic condition for the good operation of tape. Foreign materials will affect the eccentricity, tension difference and even fracture of tape.

11.When the glue is found to have early damage in use, the cause should be found in time, repaired to avoid the occurrence of adverse consequences.